Lab Bench Power Supply Enclosure (LTC3780)

because I didn't find an appropriate enclosure for my PSU project, I decided to make my own. fits really nice but printing takes a while.

had some issue during print with ABS warping, but finallay fixed it some ABS glue - hence the enclosure surface isn't perfectly smooth. therefore I would recommend printing with PLA instead of ABS

printed the upper part upsidedown with supports in order to have nice cut-outs.

instructions & BOM: https://youtu.be/wI-KYRdmx-E

thx to @GreatScottLab for the instructions

Print instructions

Category: Electronics Summary

because I didn't find an appropriate enclosure for my PSU project, I decided to make my own. fits really nice but printing takes a while.

had some issue during print with ABS warping, but finallay fixed it some ABS glue - hence the enclosure surface isn't perfectly smooth. therefore I would recommend printing with PLA instead of ABS

printed the upper part upsidedown with supports in order to have nice cut-outs.

instructions & BOM: https://youtu.be/wI-KYRdmx-E

thx to @GreatScottLab for the instructions

Print Settings

Printer: DIY I3 MK2

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 15%

Notes:

printed in ABS - had some issues with ABS warping... I would recommend using PLA.