Bambu Lab X1 / X1C / P1P

Hello all,

This file can be used to test the first level. I have heard over and over again that a somewhat bent heating plate can cause problems.
This file can be used to reveal problem areas and avoid areas on the heating board if necessary.

Note:
Please do not be disappointed if there are places with problems,
I myself have only experienced problems when printing very large parts.
Don't forget that the Bambu Lab X1, X1C, P1P is still a very good printer (I love it) :-)

Additional:
I have been using the Orca Slicer for a while now, it is based on the Bambu Slicer.
With the Orca some great features have been added or implemented.
Attached is the link to the Github project.

https://github.com/SoftFever/Orcaslicer

The calibration function is very clever :-)

if you want to keep me awake, feel free to buy me a coffee ;-) https://paypal.me/saiboTTech

Print Settings

Printer:

Bambu Lab X1 Carbon + AMS

Rafts: 

No

Supports:

No

Resolution: 

0.2

Filament: what you wand ABS, PETG, ASA, PLA what you want

Notes:

I printed with PETG and used the high temperature plate (without additional bonding agent).

If you like, you can share the results of your test with us here.
(Please share under "makes and comments")

Category: 3D Printing Tests