Magnetic Split handle

These handles were designed for ease of installation, lay-flat form factor, and magnetic coupling. Two wood screws (or machine screws) on each end of the pivot points prevent axis misalignment. The pivots are comprised of a 1" no 6. machine screw and a corresponding #6 nylock nut.

Depending on your application, an additional latch may be necessary to keep the two surfaces tight together.

BOM:

QTY 4 - 1" machine screw: https://www.mcmaster.com/91772A153/

QTY 4 - #6 nylock nut: https://www.mcmaster.com/90631A007/

QTY 8 - #6 pan-head wood screw or machine screw length sized to fit your application

QTY 2 - pivot piece 1, pivot piece 2, and handle half

QTY 6 - DIA 8mm x 3mm magnets.