Voron 0.2 TFT35 SPI V2.1 Touch Screen Housing by Ken226 STEP and F3D Files

This is a recreation of a screen housing for the Voron 0.2 and the BTT TFT35 SPI V2.1 by Ken226 and Eric Ebert.
37
175
1
1351
updated April 5, 2023

Description

PDF

This model by Ken226 has been recreated to provide STEP and F3D files, as these were not provided with the original post. All renders and the STL files were created exclusively by Ken226; I take no credit for the original design.

Ken's description:

Disclaimer:  I used BTT's CAD model and the Voron 0.2 CAD models for dimensions. I don't own a Voron 0.2 or a TFT35, but Printables member Eric Ebert, who assisted with many of the features of this design Printed and test fitted a couple of these during the design process.

 

The screen is held in via 4 m3x8 socket head cap screws, which go into the housing from the back and thread into the bezel.  The bezel is secured over the accents with a couple drops of super glue.

 

I tried to design this so that it would require minimal supports, but the honeycomb patter has some fairly long bridges.  PrusaSlicer's organic supports set to 30* worked very well for me on a similar design.

Tags



Model origin

The user re-uploaded this model. The user is not the original author of the model.

Voron 0.2 TFT35 SPI V2.1 touch screen housing
by Ken226
It is not allowed to upload a model that already exists on Printables.

License


Highlighted models from creator

View more