Universal Frame Mount for 3030 aluminum extrusion

This is a remix clamp-style mount designed to attach to any 3030 extrusion frame. It tightens with a screw and can be positioned anywhere. It provides two mounting holes on the top, two on the bottom, and four on the back, with slots to insert square M3 nuts for each hole.

The mount does not interfere with the moving parts of the printer and can use with the original m10 adapter:
https://www.prusaprinters.org/prints/40947-angled-double-p4-m10-adapter-for-mk3s-frame-for-re

The mount prints with no supports. You will need a square M3 nut, and a 20-30 mm M3 screw.

Print instructions

I printed this in PETG with a 0.2mm layer height.
35% fill density, 4 Perimeters.
No supports required.

-