Wemos LOLIN D1 mini V4 - TP4056 - BMI160 Holder(s) - SlimeVR or other - Split and Combined

A little helpful file for making cases to hold either; 

• Wemos LOLIN D1 mini V4
• TP4056
• BMI160

Holds these parts loosely.

Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics

Option for my first test in combined mode or separate/split model files.
 

The mousepad is a SOKU DROP X1.

The components are held a little loose and not too snug, the BMI160 was fairly stuck in place.
I'll be using these files to help me make a case.

I might add a file later for the other Wemos D1 Mini with the big chip on it as shown on the SlimeVR Schematics, I have a few of those too.

Let me see your finished project in makes!
I hope that this will be handy for people!

Print settings

Creality Ender 3 Neo at 210 (Tungsten Nozzle so you can dial back)
PEI Bed for easy popping off.

30% Triangular Infill and 0.2mm Layer Height.
Supports not needed unless you modify it to need them.