Curvy, Simple Incense Holder
Description
PDFI liked ShaGa_17's Simple modern Incense holder but it wasn't wide enough for my needs. Unfortunately they didn't provide any source file and merely scaling it to be wider wouldn't work. Additionally, their two provided hole sizes didn't fit my Satya incense sticks without boring out the smaller one.
So I tried my hand at creating a similar design. The hole size is specified at 2mm. Printed WITHOUT supports supports, this holds my Satya incense sticks. I don't know about other brands.
I'll likely add a Fusion 360 export file in the near future. If you don't see it but want it, please leave a comment.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament: Prusament PLA Mystic Green
Notes:
Print in the provided orientation without supports.
If the hole is not big enough, let me know what size you need or use a tool such as this [needle tool](https://www.amazon.com/gp/product/B01KSPJSNQ) to open the hole a bit.How I Designed This
I used Fusion 360 with Extrude along Path to get the curved shape and the pipe tool to create the hole.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.