Black Panther Bust (Remix)

I really like the Black Panther bust from Masterclip 3D but I'm not a fan of the stand. I tried doing a plane cut to get just the bust, but the design has a cylinder cutout which actually caused my first attempt to fail when the model's weight tipped it over during printing.

I've simply done the same plane cut and added a much wider/taller cylinder "base" to the back to provide more stability and to fill the gap of the original model. Printed without issue.

Note: The original STL, when loaded into Slic3rPE at least, is still showing a lot of errors that the slicer has to correct for. It printed without issue but I can't speak to if another slicer will be able to successfully work with it.

Update 2020/09/06:
After Chadwick Boseman's passing there have been a number of folks downloading this. I appreciate it and hope you're sharing with other others as well. I've uploaded some new pictures of a second print i did in Prusa's Galaxy Black PLA.

I also encourage you to do some amount of charity donation if you can. It's best to do some in-depth research when possible, but one easy donation to make is a GoFundMe that's been put together by the Marvel Studios subreddit

Print instructions

Category: People Summary

I really like the Black Panther bust from Masterclip 3D but I'm not a fan of the stand. I tried doing a plane cut to get just the bust, but the design has a cylinder cutout which actually caused my first attempt to fail when the model's weight tipped it over during printing.

I've simply done the same plane cut and added a much wider/taller cylinder "base" to the back to provide more stability and to fill the gap of the original model. Printed without issue.

Note: The original STL, when loaded into Slic3rPE at least, is still showing a lot of errors that the slicer has to correct for. It printed without issue but I can't speak to if another slicer will be able to successfully work with it.

Update 2020/09/06:
After Chadwick Boseman's passing there have been a number of folks downloading this. I appreciate it and hope you're sharing with other others as well. I've uploaded some new pictures of a second print i did in Prusa's Galaxy Black PLA.

I also encourage you to do some amount of charity donation if you can. It's best to do some in-depth research when possible, but one easy donation to make is a GoFundMe that's been put together by the Marvel Studios subreddit

Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: Yes

Resolution: .1

Infill: 5%

Filament: Fillamentum PLA Vertigo Galaxy
Notes:

I sliced with supports everywhere but used support blockers in Slic3rPE to block everything except the face.