Super lube cap for 85 gram tube

I printed the orginal file and realized it was for a bigger tube.

I used the STEP file to remix it for the 85 gram tube i bought here in sweden.

Print instructions

Print accoringly to Super Lube 8oz by Dan, see his instructions below:

Printer: Prusa Mk3s

Supports: No

Resolution: 0.15mm

Infill: 15%

Filament: N/A PLA N/A
Notes:

You will need to clean out the center hole with pliers post printing. Adding supports makes cleaning it out more difficult so refrain from using supports.

Print two at a time or alongside another some other part for best results.