AnkerMake M5 rounded/square build plate guides

This 3D printable part designed to assist with the proper alignment of your PEI build plate on the M5 bed. Placed under the bed, this part helps save time by ensuring that the build plate is positioned correctly.

---------------------------

Printing recommendation

- Standard version

   - You will need to add supports
   - Print in 25-100% honeycomb infill



It is suggested to print this in ABS, but do not print it in PLA or PETG as it may end up sagging or get too soft during high temp printing. Keep this in mind.
 

---------------------------

- Reinforced version

   - You will need to add supports.
   - Can be 3d printed in PLA, PETG and ABS only with 100% infill.



---------------------------

- Slim version

  - You will need to add supports.
  - Can only be 3d printed in ABS, PETG-CF, PAHT-CF etc. at 75-100% infill.
  - It should work with the Accessory Bins for AnkerMake M5 by SpiggyTech, but i don't know if it's compatible or not as of now.