OpenDTU Breakoutboard Case

This is a 3D printed Case for the OpenDTU Breakoutboard by blinkyparts.com:

https://shop.blinkyparts.com/en/OpenDTU-Breakoutboard-Your-evaluation-for-your-balcony-solar-system/blink237542

The OpenDTU breakout board can be used to read out and control inverters from Hoymiles. These are very often installed in balcony solar systems. If you have a balcony power plant with a Hoymiles inverter, it is worth taking a look here: https://github.com/tbnobody/OpenDTU

There you will find the original code of the developers.

Our breakout board was designed together with the developers and already includes future features such as LEDs and possibly even LED strips (though this is still up in the air).

Rails are fitted inside the case for the breakout board. The board itself is then secured laterally with two M2x6 screws. On the back there is a recess for the antenna and the Mirko USB cable.

There are also hexagonal ventilation holes at the top and bottom. On the front there is a recess for a display. The display is attached to four nipples on the inside. The housing is closed with four M2x6 screws.

This Case was created by Jan, Noby and me.

Accessories needed

• Four M2x6 screws and the matching Allen key
• Two toothpics to fix the display in place

Print settings

• 0.2mm Quality
• PRUSAMENT Galaxy Black PLA