Dune dice storage box

Introducing the Dune dice storage box!

The specially tuned “Dune” shapes of the box has special functions:

• When the box is closed: The dunes keeps the dice separeted and stay in place
• (Note: result might vary depending on the size of your dice set)
• When the box is opened: The dunes evenly space the dice apart, allowing the player to place each die at their desired spots, and grab them easily.

Built-in rolling tray:

• The lid of the box also act as a rolling tray when the box is open.

There are several variation of the Dune dice storage box:

• Manetic vs. Clip Mechanism
  • For the magnetic version, each box requires six “5 mm diameter x 10 mm long” magnets. The magnets not only holds the lid closed, but also aligns the boxes when the boxes are stacked!
  • For users who don't have magnets on hand, the clip mechanism version has a print-in-place spring-loaded clip that holds the lid closed.
• One Piece vs. Separate Pieces
  • For users with Prusa printers, or printers with print bed larger than 230 x 130 mm, you can choose the one piece version and print the box in one go, even the hinge!
  • For users who use printer with smaller bed size, fear not! The separate pieces version split the box into two pieces, even the Prusa MINI can handle it.
  • (The second photo displays a “separate pieces - clip mechanism” variation.)
• Blank vs. Hexagon vs. D20
  • These are decorative design options for the lid of the box, choose as you please, or add your own designs!
  • (The Dune dice storage box is CC BY-SA 4.0)
  • (The third photo displays the three design options)

Printing instruction:

• Print the files as orientated.
• Files are optimized to be printed without supports.
• For the SeparatedHingePin.stl, adjust the percentage in the X and Y axis in the slicer if the pin is too loose or too tight.