ATU-100 Antenna Tuner box!

this is a project box for the very popular ATU-100 antenna tuner kit.

you need: 

• ATU-100 kit
• 2 BNC connector
• 16mm latching button
• 16mm momentary button
• a set of feet
• some hot glue 
• 4 plastic screws 5mm~

there are standoff for the board+ holes for screws!

there is a empty hole in the rear of the box in my pictures, it is because this is my 2nd build and i only ordered 1button. so i was lacking that rear power switch for the photo-shoot.