customizable beer crate with individual text and logo

To be honest, I was a bit annoyed that there are so many beer crates for batteries but none of them is customizable the way I'd like it to be. So I created my own, that I'd like to share herewith…

beer crate customizable in

• crate
  • color
  • number of rows (x)
  • number of columns (y)
  • wall thickness
  • with or without stackability on top
  • with or without stackability on bottom
  • stackability tolerance
  • outer corner radius (z)
• lateral recess
  • height above recess (z-position)
  • height
  • size in % (x and y)
  • corner radius
• floor
  • height
  • with or without grid (holes)
  • grid with rectangles or triangles
  • triangle wall thickness
• bottle / battery / whatever
  • diameter
  • height
  • grid
    • height
    • wall thickness in x-direction
    • wall thickness in y-direction
  • conical or not
    • top diameter of glas (bottom of crate)
• logos from svg
  • with or without logo in x-direction
  • with or without logo in x-direction
  • color
  • filepath x-direction
  • filepath y-direction
  • logo positive or negative from wall
  • height (positive or negative)
  • z-angle in x-direction
  • z-angle in y-direction
  • size in x-direction
  • size in y-direction
• text
  • with or without text in x-direction
  • with or without text in x-direction
  • color
  • text x-direction
  • text y-direction
  • text positive or negative from wall
  • height (positive or negative)
  • z-angle in x-direction
  • z-angle in y-direction
  • size in x-direction
  • size in y-direction
• aso.

All comments currently in German. Please message me if you cannot find translation.

Updates

• 03.04.2023: corrected minor mistakes in scad-file
• 03.04.2023: added possibility to adjust z-angle for higher texts and logos
• 14.05.2023: possibility to make conical fitting (especially for glasses) at bottom part of crate (see Gabriel glas stl-file)