Geneva Mechanism

This is a simple Geneva mechanism, they are often used in mechanical watches, film movie projectors, movie cameras, plotters, automated sampling devices, and more.

You will need to print two caps, which should hold in place with friction.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 S1

Rafts:

No

Supports:

No

Resolution:

0.2 mm

Infill:

20%

Filament: Polymaker PLA

Notes:

Print settings don't matter too much on this, but make sure you have enough infill and walls to keep the shafts from breaking off.

Category: Engineering