This is a baseplate for an open-source 65% keyboard called Lagom.
You will need eleven M2x4 heat inserts and eleven M2x5 screws (I cut longer screws to length).
The first (V1) design uses only mounting points on the PCB to support the keyboard, the V2 is currently untested but provides additional support for the corners of the keyboard (especially for the encoders).
I have added models for some TPU feet that should be printed separately. There are recesses in both the V1 and V2 baseplates made to allow for easy mounting. The feet have yet to be tested. They are supposed to slightly angle the keyboard. Make sure to orientate them accordingly so the slight angle isn't lost due to printing resolution.
The author marked this model as their own original creation.