Sword Display Stand

I had received to make a display stand for the family sword of a friend of mine.

After taking some measurements I drew up a design that would be able to hold the sword on display both with and without the scabbard on.

With the scabbard on it lies into the curves of the peg, without the scabbard the blade falls neatly into the V-grooves in the pegs to stay upright.

Don't have a printer yourself? Contact me on my Etsy store and I'll be happy to print it for you: https://www.etsy.com/shop/XDr4g0nX3DPrinting

Print Settings

Printer:

Gemstock MK2 - Almandine

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0,20mm layer height

Infill:

15%

Filament:

Black

Notes:

Print the pegs on their side without support and the base flat with supports.

Assembly

After printing I mounted the pegs onto the base using 3x20mm flathead screws.
You could alternatively use glue instead of screws, or both if you want extra security.