AnkeMake M5 Blink-Mini Camera Mount v6

This is a modification of Alex B (https://www.printables.com/de/social/524533-alex-b) camera mount. It will hold an Amazon Blink-Mini camera.

This is my first project. I used Thinkercad.

What is different to the original model:

• The holder ist now for the round plate of the Blink-Mini camera
• It ist 4 mm higher so the camera cabel will fit in the special gab.
• A special gab for the camera cabel

How do I printed it:

• On an AnkerMake M5 (foundet it on Kickstarter)
• Used the origial AnkerMake PLA+ filament (here in gray)
• Used the AnkerSlicer with 20% infill, 100% flow/215 °C/60 °C plate temperature
  (initial layer: 120% flow/230 °C/65 °C plate)
• Layer height: 0,2 mm
• Speed: Best experience with 50 mm/s for the initial layer an skirt/Print speed at 250 mm/s
• No supports needed (printed upside down)
• ~ 2h print time
• 49g filament
• 86 x 211 x 65 mm

I hope you can use it. I use the Blink-Mini camera for watching what the print does.