WLToys 12428 - Battery NiMH Holder

The original WLToys 12428 came with a small LiOn battery pack. But I want to drive longer and don't want to hazzle around with LiPo's in my household. So I choose a 5.000 mAh NiMH battery block.

So here are the steps:

• print this NiMH battery holder for your NiMH 6-cell-battery
• cut out the chasis in the battery region (like on my pics)
• put the battery with holder from the rear in the car
• save the holder in place with 2 metal clips for RC cars
• you're ready to drive - in my case 1,5-2 hours with this battery...

_______________

My print settings:

• Nozzle: 0.4 mm
• Resolution: 0.2mm
• Support: no
• Walls: 4-6
• Infill: 25%
• Printing time: 40min