Linked Wire Antenna (e.g. Dipole or EFHW) Links

Links with labels for 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m and without label to build a linked dipole antenna as described in multiple places (e.g. here or here). With the wire I used (simple 1.5mm² wire from a local hardware shop), no additional material was required to fix the connection. Due to the friction within the bends, everything stayed in place by itself.

The difference to the other designs is that I wanted to be able to use the shorter parts (e.g. only 20m and 30m) independently. Therefore the holes in the links are large enough to completely remove the piece for the next lower band and attach a rope instead.

The prints in the pictures were done using the 0.3mm layer draft profile from PrusaSlicer.