Sufrace-Charger Mount

Charger Dimensions: 110 x 55 x 30 mm
Tolerance around the charger:  at least 0.5mm (perfect fit, very little wiggle room)

Print Settings:

• Material: ASA
• Layer height: 0.07mm
• Bed temperature: 110°C
• Tool temperature: 260°C
• Part-cooling Fan: OFF

Other Stuff:

• Used glue stick on the bed
• Printed in an enclosure
• Forgot Support structures but did turn out well. (supports might be added on the inside bottom left and right, as there are very small overhangs)

Don't hesitate to ask questions :)