cat food bar

TL;DR

Cat Content: A food bar for cats or small dogs that is adjustable in height and angle to protect shoulders and other joints.

update 2023.0408

• added 3mf for prusa XL

Collection

Motivation

Learned that a foodbar with an angle of 15° and the height adjusted to the cat is better than bowls on the floor. So a nice work with freecad ended up in this functional print made of PETG and PLA.

Let's get started

If you own a mk3s with 0.6 mm nozzle you may use the premade gcode files else you need to slice by yourself.

Settings:

• 2.45 mm wall size
• 1.10 mm bottom layer thickness
• 1.80 mm top layer thickness
• 20% infill

Parts to print:

• two sides
• one bar
• two rods
• two knoobs

Attribution

© yahbluez

Can I sell copies of this?

Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0.

Donation

If you like to donate you can buy me a coffee

Filament used

The bar is made from rainbow PETG,
the sides are made with yellow PETG,
the connectors are made with white PLA.