Top-mount battery case for the EMAX Tinyhawk 2 Freestyle, remixed from Takumi13's design. I included two cutouts to make room for the stock camera mount, and made some alterations with a different printing orientation in mind. Also widened the holes for the m2 mounting screws.
Printed in PLA on 0.4mm nozzle at 0.15mm layer height with no supports.
EDIT: tested with the original EMAX 450mAh batteries (2x 1S), as well as larger GNB 2S 550mAh batteries. The 2S batteries were a snug fit but still works well.
The author remixed this model.