This is a Tricopter Y4 Drone that i have design. I will upload the M3 distance tube but i dont recommend to use them. I did just make them to show how the frame look like.
Printer settings:
Infill- 36% Grid pattern
Perimeters- 4
Hight- 0,2
I needed to use XY compensation +0,2 on my printer
HAPPY PRINTING!
You need:
4 props where 2 is CCW and 2 is CW
12pcs M3x8mm bolts
16pcs M2x5mm bolts
4pcs M3x50mm distance tube
1pcs flightcontroller
1pcs ESC board
1pcs Nano FPV Camera
FPV Goggles- this I have not linked, Find your own personal choice
1pcs FPV Transmitter
1 Radio transmitter and 1 reciver- this I have not link because you need to match transmitter and reciver
1pcs XT30 male connecter
4pcs motors
1pcs or more battery 3-4s between 450-850mah
Here I have linked all you need except for Goggles and Radio transmitter and reciver
Pick 1 of item the below
You need 4 of the item below
Pick M3x8mm and M2x5mm of item below
Pick M3x50 of the item below
Pick 1 male of the item below
Pick 1 of the item below
Pick 1 of the item below
Choose any 3-4s battery but maximum 850mah below, I recommend 4s
Pick 1 package of this item below, choose your own color or find some other 3" prop that you like
The author marked this model as their own original creation.