Collapsible Wand of Holding

Holds one full set of dice.

My first attempt making anything collapsible. If you know how to do this please hit me up because i could really use a few lesson. That being said this turned out pretty good i think.

This is version 2. Version 1 proved to be almost impossible to print in place. 

Speaking of printing. The only thing that needs support is the cap. make sure to have supports turned off for everything else.

There is an STL with Wand and Handle. If you have your printer tuned you should be able to print this but if you are having problems you can still produce the final product. Just print the Wand STL instead. once you have that, print the the handle STL but insert a PAUSE command just before the wand cavity is closed off. when the printer pauses, insert the wand you printed earlier into the handle. 

If you are wondering why it would be easier to print the wand outside of the handle, its because I have it rotated upside down. This means it is more stable to print.