A simple box to hold the batter for a fish finder in the kayak. Has space for wires and a 1" webbing strap to remove it.
12
95
0
528
updated March 30, 2023

Description

PDF

A friend of mine couldn't find a box to hold the battery he used for his fish finder. He wanted it to be a snug fit. We designed it to leave space at the top for the wires and he had some rubber wire grommets. The ones he had are about ½" ID. They measured 11.6 mm ID and 17.68 OD with an overall thickness of 9.7mm.

The battery fit very sung. DO NOT put it in with out a piece of 1" webbing around it to pull it back out. 

This was printed on an Ender 3 with .28 layer height in Jessie PLA. It probably should be printed in at least PLA+ but if using outside a lot ASA or PETG would be the way to go I think.

Model origin

The author marked this model as their own original creation.

License