Alternate Nozzles for Dyson handheld vacuums.
131
950
5
6775
updated July 5, 2023

Makes

Comments

Vacuum bag attachment works! Thanks

Passt perfekt! Aber man sollte auf jeden fall die Version mit dem Loch wählen, da sonst der Dyson verrückt spielt und nicht richtig saugt.

The thin nozzle fits my very old Dyson DC62 perfectly, but I had to drill multiple holes because the motor would turn off when vacuuming too close to a surface because too little airflow. Suction is still very good at the front now, and it doesnt turn off anymore.
Great for those very hard to reach places, especially cleaning out 3d printers and PC cases!

Also, I printed this before the author added a version of the thin nozzle with holes, I'd definitely recommend printing that one if you have an older model Dyson that might not be as strong, like I do. (edited)

Printed "Thin nozzle" in 2hr 15min very nice fit on Dyson V6 though one problem with the suction it keep starting and shutting off after 1sec and repeats. Guess it feels too much air flow blockage. The original tools that comes with it has some small holes on the sides maybe it needs some of that?

View 2 more comments

@Antex_1005825
I added a version with 5mm holes. I hope this solves the problem.

@SvenK_710449 Thank you now it works without interruption

Great print makes this vacuum a lot more usable as I got it without any hose or adapter

All comments loaded