Prusa Bear Mod Upgrade Mk3 / Mk3s LCD cable clips

Remix from Martin_au https://www.prusaprinters.org/prints/1683/files

A cable clip for the LCD cables for the Bear Mod upgrade. The Bear Mod sturdy frame upgrade for Prusa MK3S is a 2040 aluminum extrusion, so different sized LCD cable clips are needed.

Also included a second clip rotated 90 degrees just in case you need one.

Print instructions

Printed on its side with Hatchbox Orange PETG at 0.2mm layer thickness, 100% infill, and supports on bed only.

Gcode is from PrusaSlicer for five clips, supports, generic PETG, 0.2mm layers, 0.4mm nozzle, MK3s default settings.