Creality S1 Pro/Plus Filament Guide To Be Used With Filament Dryer (Eibos EasyDry)

Filament guide I designed to be used with my S1 Pro and Eibos EasyDry Filament Dryer, should work with other dryers such as the Sunlu S2 etc.

This design allows you to retain the filament sensor without moving it and also retains the factory spool holder in its original place, should you want to print without using a filament dryer.

"S1 Pro Filament Guide - Main Support (M10 PTFE Fitting)" - allows the use of a 10mm thread PTFE fitting so you can run a bowden tube between the main support and the filament dryer.

“S1 Pro Filament Guide - Main Support” - No bowden tube with this version the filament simply runs through the guide.

Required parts:

2x 625 Bearings
2x M5 8mm Button Head Screws (for mounting to printer)
2x M5 T Nuts (for mounting to printer - your printer should come with 2 in the box)
1x M5 30mm Button Head Screw (bearing/roller screw)