Saitek/Logitech X52 - IKEA Svartasen HOTAS Holder

I just bought 2 IKEA Svartasens and finished my HOTAS Setup with it.

This is just a compilation of usefull things for the HOTAS itsself.

What you get:

• Platform for joystick and throttle for installation IKEA Svartasen pillar
• Joystick middle switch feel-indicator
• Bayonette cable guards for joystick and throttle
• Mini stick cap for the mouse control on the throttle (it feels just way better)

What you need extra stuff you need:

• grinding paper maybe
• double side tape to fix the cableguards

One thing i made on my own with this compilation is the spinning of the screws and nuts for the joystick, since you need to fix it with an right rotating way. So don't wonder when you screw the nuts on the joystick you have to do it the oposite way, but you will see why this totaly makes sense.

Here are the links to the original things:
https://www.thingiverse.com/thing:2742694
https://www.thingiverse.com/thing:2821193
https://www.thingiverse.com/thing:2777369
https://www.thingiverse.com/thing:3016061

Print instructions

Layerheight: 0.2mm
Nozzle: 0.4mm
Material: PLA
Supports: None
Infill: 20% (for everything (even for screws this is ok and the other stuff is to small to even get an infill))
Printtime: Around 24 Hours for both.

I just needed 5 seconds of grinding for the nut heads and everything fitted perfectly