Posable feet for MINI 13 (print-in-place)

Print-in-Place, updated for MINI 13 foot joint, this also work with LUCKY 13

UPDATED: uploaded V2, it is shorter than V1, same width with MINI 13 original foot

Print with same setting as MINI 13:

These are the settings I use for best results (at 100% scale and with a 0.4mm nozzle)

• Layer height 0.15mm (first layer 0.2mm)
• 3 perimeters
• 30% rectilinear infill
• Slow down the first layer print speed (30% of default)
• 0.25mm elephant foot compensation ****
• Print external perimeters first
• No brim or support material

**** elephant foot setting may vary by printer, please adjust if print failed.

All model is printed and tested by myself, enjoy~

I'm a HONG KONG MAKER, Thanks, Enjoy!

Visit my profile for more models and welcome to follow my social media account as below,
Instagram: https://www.instagram.com/fullydimension/
YouTube: https://www.youtube.com/c/fullydimension (in cantonese only)