This is a basic mount for a 3.5 inch rpi raspberry py dispay for the ender 3 pro. It also holds the raspberry pi in place.
Was modelled for a 3.5' rpi display (that connects via the gpio pins), connected to a raspberry pi 4 model B, however it should work for other raspberry pi models as long as the screw hole to pin location is the same.
The screws that hold the raspberry pi in place thread directly to the print, as well as through the raspberry pi.
The other screws screw into the stock display mount.
All screws are M3, choose lengths accordingly.
Printed in PLA, 0.2mm height with 3 perimeters and 15% infill.
The author marked this model as their own original creation.