Bambu Lab X1/X1C/P1P Poop Chute

I wanted a way to direct the poop from my X1C into the trash can I keep next to my bench so I designed this. My design has an optional deflector that should keep the poop from over shooting the trash can. 

There is also an optional blocker so, in theory, you could use this as a small poop bucket.

The poop chute has (8) holes for 8x3mm magnets to optionally secure it to the frame.

I've included the Fusion 360 archive so you can tweak the design as needed. For instance I may end up making the deflector arms slightly longer in my setup.

Get your Prusameters… Post your Makes!

If you like this project, please don't forget to  ❤ Like  and  ★ Rate! 

Printing tips

I print at 0.2mm layer height on a 0.4mm nozzle with tree supports for a decent result. Print the deflector and blocker upside down with the arms parallel to the bed surface (see 3mf).

Updates

2023-03-29: Thanks to the feedback from SpectreGadget I corrected the Fusion 360 file so it's easier to adjust.