Voron 2.4 Purge Bucket - for right extrusion, and shortened

Note: original mod is https://github.com/VoronDesign/VoronUsers/tree/master/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber

also found on Printables at https://www.printables.com/model/97976-voron-nozzle-cleaner-purge-bucket

This is a remix only of the bucket. Grab the other parts from the original page. 

Why? Because I have a Klicky dock on the left, I moved my Z endstop to the left side, and wanted to mount the bucket on the right-side extrusion (to avoid interference). I also have a wago mount under the bed, and so I shortened one side of the bucket so that it is a bit shorter than the original. 
 

I couldn't find an original CAD so I hacked away at this in Fusion 360 with some mesh editing of the original STL.