Compartmentalized Cylindrical Container for Dice, Bills and Coins

Optimal for storing dice, bills, coins and more. Shape facilitates transport. Two compartments allow better separation.

Clearance came out a little loose, gonna adjust it later. But 2 strips of tape manage to keep things quite tight:

Similarities with stielhandgranate are coincidental.

Feel free to remix.

Model: Fusion 360; Slicer: Prusa; Printer: Ender 3, PLA, 0.4mm nozzle, 0.28 resolution. About 3h30 print.

Note: There's a section in this design that requires bridging. It's the bottom part of the larger tower as follows (photo in the right side I've removed perimeters and infills so that the bridged floor is more visible):

If you're uncertain if this bridging is possible in your particular case, I've made available a crop of this exact segment, called bridging-test.stl. It should print in about 20 min. Also, double check your bridging and gap speeds.