1" x 8TPI Face Plate Centre Finder

Setup to use a 1/4" centre punch but you could substitute the centre punch for a drill bit.

1" x 8TPI it should fit the following Lathes.

Laguna Revo 12|16
Rikon 70-150VSR
Rikon 70-220VSR
Delta 12-1/2"
General 160

Print Settings

Printer brand: Creality

Printer: Ender 5

Rafts: No

Supports: No

Resolution: 100%

Infill: 35%

Filament material: PETG

Notes:

Printed in Ultimaker Cura using the following settings.

Layer Height: 0.16mm
Infill Pattern: Gyroid
Print Speed: 65mm/s
Temp: 230'C / 85'C
Print Cooling: Enabled
Use Adaptive Layers: Enabled
Enable Bridge Settings: Enabled