EIBOS Cyclopes handle

Particularly easy to install as nothing needs to be changed. The existing center holes are simply used without removing the rubber.

Thanks for the design!

Works really well. Didn’t have 20mm hex but used 20mm Philips and works fine

Thanks, works a treat.
Printed in Yellow ABS

Excellently engineered. Fits like a glove. And very comfortable to boot.

To those few people that say it fit too loosely - likely you did not screw in the cap screw fully. I did this at first but then realized I needed to just hold the washer/nut at the bottom and give each bolt another few turns and...viola! Perfectly tight.

Man, how did they not do this already, having to use 2 hands to remove this before and juggle a spool, great idea.

I ended up adding m3 heat set inserts to be more secure.
Otherwise they are fine :)

Perfect! Thank you for the model. Makes the cover a lot easier to deal with. Printed using MatterHackers Translucent Clear PETG.

Printed in Polymaker Polylite PLA Pro

Printed in ABS, nice fit. Thanks.