3S 18650 Goggle Battery box

Battery box to hold 3 18650 batteries for use in FPV goggles like the HDZero goggles or any goggles that can handle 3S input voltage (12.6v).

Uses this Battery Holder: https://www.aliexpress.com/item/32993737904.html (3x18650 Case DIP)

And this charger module (or similar): https://www.aliexpress.com/item/1005004682732678.html

And a balance charge cable like this: https://www.aliexpress.com/item/1005002974324352.html (3S 4 wires)

16AWG wire for the XT60 output, and for the wires between battery terminals

Printed in PLA+ but PLA would work fine too (my printer had issues with the filament hence the different colours in the print!)