Raspberry Pi 3 (B/B+) case, VESA mount, internal fan

Case for a Raspberry Pi 3 (B/B+)

Features

• VESA mount (75mm x 75mm)
• Internal fan mount (40mm x 40mm x10)
• Thread inserts (case and pi mounts)
• Footer pins optional

Required parts

• Raspberry Pi 3 (B/B+)
• Fan 40x40x10, 5V → Noctua NF-A4x10 5V incl. anti-vibration mounts
• 4x Anti-vibration mounts (See fan)
• 2x 1P Single Dupont connectors

Mount case

• 4x M3 thread inserts → Ruthex RX-M3x5.7
• 4x Cylindrical head screw M3 x 16mm

Mount Raspberry Pi / fan

• 4x M2.5 thread inserts → Ruthex RX-M2.5x5.7
• 4x Cylindrical head screw M2.5 x 16mm
  Optional M3 thread inserts and screws can be used. Attention the mounting holes on the Raspberry Pi must be redrilled.

Print instructions

GPIO pinout

Fan red cable (Positive pole)

• 100% fan speed: 5V power pin e.g. GPIO 2
• Reduced fan speed: 3V3 power pin e.g. GPIO 1

Fan black cable (Negative pole)

• Ground pin e.g. GPIO 6