Folding Dice Box that transform into a Dice Tower
12h 8m
5× print file
0.20 mm
0.40 mm
133.00 g
475
1572
32
8397
updated October 2, 2024

Description

PDF

Features

  • Bigger, Better & Easier to print
  • Each part can be printed individually
  • The long bridge can be printed using support
  • This is an updated version of my previous Dice Tower

Be advised this model may be hard to print

  • Your printer must be well calibrated because it's a very tight fit
  • You may see this model as a torture test for your printer and your skills
    • Choose a filament that is easy to print with a very fine tune profile
    • Try with the tolerance test print first 

Print Instructions

  • Use Default 0.20mm QUALITY Prusa Slicer Print Settings
  • For better quality, print the parts individually
  • Filament : PLA (and maybe PETG)
  • Perimeters : 2~3
  • Dice Box Tower
    • Supports : For support enforcers only
    • Use Paint-on supports for the bridge
      • XY separation : 80~100%
      • Style : Snug
  • Dice Box Cover
    • Brim : Absolutely Yes

Change Log

  • 2023-04-01
    • It's done, I’m open to suggestions ;-)
  • 2023-03-31
    • The Hex Dice Box Tower now has reinforced top side panels
      • So it can be printed with only 2 perimeters
    • The Dice Box Cover now has feet
      • Improve the overall stability of the box when opened
  • 2023-03-30
    • The Hex Dice Box Tower now has thicker walls
      • It is almost easy to print ;-)
  • 2023-03-29
    • Added another Dice Box Tower with a HEX Pattern
      • Looks pretty nice, but it is really hard to print :-/
  • 2023-03-27
    • Replaced the Dice Box Screws by Push Pins
    • Added a Tolerance Test for the Dice Box Push Pins

Tags



Awarded in the contest


Dice Storage
242 entries | March 24 – April 2, 2023

Model origin

The author marked this model as their own original creation.

License