Rostock Pro E3D Effector

Effector.

SeeMeCnC Rostock.

Bobblejot Website
Bobblejot GitHub
Bobblejot Twitter
Bobblejot Patreon

Update 28082019:

Tweaked the mounting holes for the fans because some people were finding them to be too tight.

Details:

Variation on my other Effector by removing the BLTouch mount.

Rostock Pro Effector With BLTouch

Delta printer End Effector that uses the Original SeeMeCnC injection molded Cup and ball arms.

Different fan ducts included so that you can either use an E3D V6 or Volcano block.

Hopefully you may find it useful.

Materials

1 x 3010 Fan - Aliexpress
2 x 3010 Blowers BFB0312MA - Aliexpress
1 x BLTouch or 3D Touch - Aliexpress

Fixings

13 x Small Plastic self tapping screws #4 ⅜”
6 x M3 washers

For E3D V6 Bltouch:

2 X M3x12mm Bolts
2 x M3 Nylocs

For E3D Volcano Bltouch:

2 X M3x22mm Bolts
2 x M3 Nylocs

For the 3010 Fan i used the Original screw fixings from E3D.

Enjoy :-)

Print instructions

Print Settings

Printer: Axis One

Notes:

Printed in Real Filament Black PETG purchased from Amazon.

Nozzle : 0.4mm
Layer Height : 0.3mm

Print Temp : 235°C
Bed Temp : 80°C
Print Speed : 60mm/s

Top Layers : 6
Bottom Layers : 4
Perimeters : 3

Infill : 30%

Printed on PEI.