Rectangular Magnetic Stacking Dice Box w/Custom Logos

Remix of my base dice box design incorporating some example logos
In the contest Dice Storage
8
27
0
424
updated March 26, 2023

Description

PDF

Refer to the original for unmodified parts without logos; this remix is intended to show off a few examples, and includes 3MF files containing color changes, support settings, etc. 

The Printables 3D viewer doesn't do great at demonstrating negative volumes in 3MF files, so they all look sort of flat in the viewer.

All logos that I included are attributed in the “remixed from” section, except that I got the Wu-Tang KillaBeez logo from this Thingiverse design. The “Protect Ya Dice” design was custom-made by pulling the base Wu-Tang logo, removing the text, then kitbashing it together with new text in 3D builder/PrusaSlicer. I completely forgot to get photos of that set before giving it to a friend, so I included some screenshots from PrusaSlicer.

Printing instructions are the same as the original: top/bottom parts intended to be oriented with the flat on the build plate. For the middle piece, orient the same way (with the bottom down), and use build plate supports--you may want to test your supports first to ensure clean removal.

These are designed to fit together pretty closely to prevent wobble or accidental separation. If you're going to mix/match types of filament or using different printers/slicers/etc. you may want to do some dimensional tests first to ensure that there's not a significant difference between them--I did have some minor fitment issues that required slight sanding when I tried mixing several different PLA/PETG/SLA resin prints. My tests combining similar materials never resulted in any issues.

If you want to make it quieter or nicer-looking, there's room in the design to accommodate thin felt or other finishing material inside the dice slots--I'd love to see what you come up with!

Tags



Model origin

The author remixed this model.

License