Very Simple FPV Conversion - Multiplex Easystar 2
Description
PDFJust a simple addition to Sjefke's FPV platform for the easystar 2 so that i could mount a cheapo board camera.
The hooks hold it onto the original Easystar 2 mounting locators, you'll need 2 of course.
The camera bracket fits a board camera without the outer square cut off, I think they are approx 40mm square. For me just friction was enough to hold the camera in place. The camera bracket to the mounting plate i drilled and screwed, glue would be fine though.
Print instructions
Category: R/C Vehicles Summary
Just a simple addition to Sjefke's FPV platform for the easystar 2 so that i could mount a cheapo board camera.
The hooks hold it onto the original Easystar 2 mounting locators, you'll need 2 of course.
The camera bracket fits a board camera without the outer square cut off, I think they are approx 40mm square. For me just friction was enough to hold the camera in place. The camera bracket to the mounting plate i drilled and screwed, glue would be fine though.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
