Hanging Open Box

This is an open box that can be hanged using 2 screws. The diameter of the head of the screw must be less than 1 cm. Its dimensions are 100 mm wide, 100 mm in height and 60 mm depth.

Support is not needed.

This object main web page is:
http://www.ctheroux.com/hanging-open-box/.

This object was designed using Solid Edge Community Edition.

You can request the source files on the page listed above.

Print instructions

Rafts: No

Supports: No

Resolution: 0.2

Infill: 15

Filament: Materio3D PLA