Mean Well LRS-75-24 Case

Case forMean Well LRS-75-24 PSU. Has slot for a 4.9x2.9 cm power inlet module and a DC 5525 jack socket plug for output.

Note that I left a 0.2mm gap along the horizontal section where the case and lid meet.

Link to the cad model I used as reference: https://grabcad.com/library/lrs-75-mean-well-1

Print instructions

Category: Electronics Summary

Case forMean Well LRS-75-24 PSU. Has slot for a 4.9x2.9 cm power inlet module and a DC 5525 jack socket plug for output.

Note that I left a 0.2mm gap along the horizontal section where the case and lid meet.

Link to the cad model I used as reference: https://grabcad.com/library/lrs-75-mean-well-1

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: Yes

Resolution: 0.2mm

Infill: 10%

Filament: Any PLA / PETG Any
Notes:

If printed standing supports are not needed, however it is far likelier to warp and I got short print times printing them lying down on each part's largest surface.