Guitar Pick Holder for Honeycomb Storage Wall

I wanted to have a thing on the honeycomb wall to hold my guitar picks, so I made this simple model. 

I made two variations of it, one holds 5 normal picks, and the other one holds 3 normal picks and a chunky one. The model files are named appropriately, I included both .stl and .3mf file types and the gcodes my slicer generated. I printed it upside down so the top is textured, but it really doesn't matter that much. 

As for the dimensions, the hole for the picks is 1.5mm, and 3.5mm for the chunky one. The gap between the picks is 2.5mm. The height is approx. 13mm, the part that gets plugged into the empty wall insert is 13mm long.

I'll try and make more versions, so if you have any suggestions, feel free to tell me. Also, you can make your own versions of it, but don't forget to mention the creator of the Honeycomb storage wall, and me:)