Eibos EasDry Desiccant Bucket

This is a complete rework of an existing container @Matten79 made, that I have adapted for silica gel / desiccant rather than Calcium Chloride. It features a sturdy and printer-friendly design, multi-body lid so infill can be used to allow air in and out of the desiccant container, a nice non-intrusive fit, and a tight snap-fit lid. There is also a small groove at the top to place your fingers to assist you in removal. It's not just pretty, it's functional!

How'd you do the cool infill lid?

1. Import the STL into PrusaSlicer, and with the model selected, click “Split to parts” in the plater hotbar. The icon looks like this:  
2. Use the selection menu in the right to select the lids main body:
3. Once you've found found the right part, right click on it in the side menu and select “Infill” as well as “Layers and Perimeters”
4. Make sure the lid has 0 top layers and 0 bottom layers, and at least 2 perimeters. Be sure to select the infill pattern you want and set the fill to 35%. I find Gyroid works the best.
5. Once you have your settings the way you want them, click “Slice now” and inspect your lid in the gcode previewer.

If you are pleased with how that looks, send it! The parts are pre-oriented in the STL for ideal printing. If you've got a quick printer, it should only take just over an hour or so. I recommend printing these parts in ABS or ASA as that will provide the most longevity for the parts because they will be located inside of a pretty hot filament dryer. If you're printing a material that doesn't shrink like ABS/ASA does, it might be a good idea to scale the lid down 0.5%-1%, as it is intended to be a pretty tight fit. (Trust me, you don't want to spill these things!)

Share your makes! Would love to see how these turn out!

Adapted for silica gel / desiccant rather than Calcium Chloride, improved the lid, added a groove for removal.