Voron 2.4/Trident exhaust adapter for machine close to wall

I wanted to use the exhaust port of my Voron 2.4 but the counter top I put my printer isn't deep enough.
30
134
1
909
updated March 20, 2023

Description

PDF

I wanted to use the exhaust port of my Voron 2.4 but the counter top I put my printer isn't deep enough. The stock port has a fan attach to the HEPA filter housing then the adapter pokes out quite a bit. That doesn't leave enough room to attach a hose and vent out ABS fumes to a 2 inch hole I drilled on my wall.

I designed this adapter to not poking out but rather point directly down (or you can turn it left or right) so a kitchen drain hose or washing machine drain hose can be used. The outer diameter of the hose I use is 42mm but I included a STEP file if you need to make some changes to fit the hose you can find in your area.

Usually you'd put a fan in between the HEPA filter housing and the adapter but I don't have the fan that fits so I use a different fan and put it outside to pull the air out. 

Tags



Model origin

The author marked this model as their own original creation.

License