This is my second version of the game. Each piece is unique to their side. No supports are needed. Just print out each side with a different color. 14 pieces for each side.
Then print out the Cathedral in a 3rd color.
I have also included 5, simpler, alternative pieces if you want to swap them out.
The board and cover are simple enough. The cover are angled corners to prevent curling when printing. I use a 70 degree bed with extra glue stick on the corners. I also don't use the fan until the 10th layer.
Feel free to copy the pieces and design your own. I would love to see what people come up with.
Alternative and Cathedral: https://www.tinkercad.com/things/iBTUqgePbG1
Side 1 Pieces: https://www.tinkercad.com/things/8i13GqjQ6oh
Side 2 Pieces: https://www.tinkercad.com/things/0jJJdrp4lOe
The board is 16mm per square. Designed with a 1mm tolerance. so a single piece is 15mm, a two square piece is 31, and 47 for a 3 section piece. etc.
Category: GamesThe author marked this model as their own original creation. Imported from Thingiverse.