24mm 1/4" Socket for Rockshox

Designed this socket to service my rockshox suspension(xc32) and made it to fit on my 1/4" torque wrench.

Printed in PLA and it works really well for ocasional services at home.

I recommend printing by side to take advantage of the layers strengh and it will need supports. Also use more perimeters.

IMPORTANT: I use this tool with 7.3Nm and it can handle, but If you need more torque, this tool maybe not work for you. As advised in comments it break within the 1/4" drive area

Print instructions

Category: Tools Summary

Designed this socket to service my rockshox suspension(xc32) and made it to fit on my 1/4" torque wrench.

Printed in PLA and it works really well for ocasional services at home.

I recommend printing by side to take advantage of the layers strengh and it will need supports. Also use more perimeters.

IMPORTANT: I use this tool with 7.3Nm and it can handle, but If you need more torque, this tool maybe not work for you. As advised in comments it break within the 1/4" drive area

Print Settings

Printer Brand: Creality

Printer: Ender 3

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.2

Infill: 30~50%

Filament: Esun PLA + PLA Grey